Fix15 is a high quality single component flexible adhesive joint sealant.

Available in a 290ml cartridge and a 600ml sausage in White or Black.

• Ideal for: Sealing joints, seams, and gaps on decks, hulls, hatches, and more.
• Key Features: Waterproof, UV-resistant, paintable, flexible, non-sagging.
• Available in: 290ml and 600ml cartridges in black and white.

FIXTECH FIX-15 PRODUCT SPECIFICATIONS

• Base MS Polymer®
• Consistency, Density Stable Paste, 1.48kg/m3
• Curing system Moisture Cure
• Skin Formation(*) Approx. 15 min (23°C/ 50% R.H)
•  Tack Free Time (*) Approx. 4 hours (23°C/ 50% R.H)
• Cure Rate (*) 3-4mm/24hr (23°C/50%R.H)
• Hardness 50 Shore A (DIN53505)
• Change In Volume <3%
• Specific Gravity 1.55 kg/m3
• Maximum Deformation ± 12.5%
• Temperature Resistance (cured) -40°C→100°C Shortly resistant up to +200°C
• Elastic Modulus 100% 1.1 N/mm² (ISO37, DIN 53504)
• Tensile Strength 2.9 N/mm² (ISO37, DIN 53504)
• Elongation At Break > 250% (ISO37, DIN53504)
• Shear Strength: >1.6N/mm² (ISO37, DIN 53504)

BENEFITS FOR FIXTECH FIX 15

• MS Polymer, chemically neutral and fully elastic
• Free of isocyanates and solvents
• Suitable for above and below the waterline
• Paintable and resistant to mould (compatibility tests recommended)
• UV stable producing non-yellowing whites and colour fast blacks
• Primerless bonding to most common substrates
• 2.2MPa - Equivalent to holding 22kg per cm2

Fix 30 is a solvent and water free universal flexible adhesive. Suitable for bonding many types of timber, stone, marble, granite and other products onto a variety of substrates. It is ideal for exotic timbers and suitable for external and internal applications for marine, transport and construction industries. Ability to feather edge build without shrinkage or cracking, sound absorbtion, impact resistance and flexibility. Fix 30 cures by means of a chemical reaction within the adhesive. Once cured (approx. 24hrs @ 21°C and 50% R.H) an elastic non shrinkable adhesive layer is formed, which is resistant to heat and moisture. 

• Perfect for: Bonding a wide range of marine materials, including teak, fiberglass, wood, and metals.
• Key Features: High strength, flexible, waterproof, UV-resistant, paintable.
• Available in: 600ml cartridges in white.

FIXTECH FIX-30 PRODUCT SPECIFICATIONS

• Base Hybrid Polymer
• Available in a 600ml sausage in white.
• Curing system Chemical Cure
• Open Time @ 21° and 50% R.H (*) Approx. 30-40 minutes
• Adjustability Time @ 21° and 50% R.H (*) Approx. 10 minutes
• Specific Gravity (DIN 53479) Approx. 1.65g/cm
• Viscosity (Brookfield mPa.s) Approx. 56.000 (HBT A/10)
• Elongation at Break Approx. 300%
• Application Rate 800-1200g/m2 depending on substrate
• Total Solids Content 100% (solvent free)
• Temperature Resistance (cured) - 40°C to 90°C
• Durability Against Aging Good
• Set to Load Bearing Min. 12hrs
• Sanding Finishing Min. 12 Hrs
• Shear Strength: > 1.5 N/mm2

BENEFITS OF FIXTECH FIX30

• Single component Hybrid Polymer
• Suitable for bonding all types of wooden and stone floors and walls.
• Suitable for use on porous and non-porous surfaces.
• Free of Isocyanates and solvents.
• Rapid cure and high final bond strength.
• Feather edge to 10mm.

Fix190 is a single component adhesive sealant offering ultimate high strength in structural bonding and direct glazing bonding and sealing.

• Combines sealing and bonding properties: Ideal for areas requiring both watertight seals and strong adhesion.
• Key Features: Waterproof, UV-resistant, paintable, flexible, non-sagging.
• Available in: 600ml cartridges in black.

FIXTECH FIX-190 PRODUCT SPECIFICATIONS

• Base MS Polymer®
• Consistency Stable Paste
• Curing system Moisture Cure
• Skin Formation(*) Apporx. 12 min (23°C & 75% R.H)
• Cure Rate (*) 3-4 mm/24Hrs (23°C & 75% R.H)
• Hardness 45±5 Shore A
• Change In Volume < 2%
• Specific Gravity 1.38g/mL
• Maximum Deformation 20%
• Application Temperature +5°C to +35°C
• Temperature Resistance -40°C to +100°C
• Short Temperature Resistance +180°C (30 minutes), +200°C (15 minutes)
• Elastic Modulus 100% 1.0N/mm2 (ISO 8839)
• Tensile Strength > 1.6N/mm2 (ISO 8839) = 3.6MPa (ISO 37)
• Elongation At Break 230% (ASTM D 1002)
• Shear Strength: > 1.8N/ mm2 (ASTM D 1002)

BENEFITS OF FIXTECH FIX 190

• MS Polymer, chemically neutral and fully elastic
• Free of isocyanates and solvents
• Extra long working time
• Suitable for above and below waterline
• Portable water certified
• Paintable and resistant to mould (compatibility tests recommended)
• UV stable producing non-yellowing whites and colour fast blacks
• Primerless bonding to most substrates

• 3.6mPa- Equivalent to holding 36kg per cm2

   

Fix 1DC is a high quality single component adhesive sealant with a low viscosity, excellent adhesive properties designed for Teak and Synthetic caulking.

• Specially formulated for teak decks: Provides superior adhesion, flexibility, and waterproofing for long-lasting results.
• Key Features: UV-resistant, mold-resistant, non-staining, easy to apply and clean.
• Available in: 600ml cartridges in black.

FIXTECH FIX 1DC PRODUCT SPECIFICATIONS

• Base Hybrid Silane
• Consistency Stable Paste
• Curing system Moisture Cure
• Paintability Not Paintable
• Skin Formation(*) 40-45 min (23°C & 75% R.H)
• Cure Rate (*) 2-3mm/24Hrs (23°C & 75% R.H)
• Hardness (Shore A) 37
• Change In Volume < 2%
• Specific Gravity 1.30g/mL
• Maximum Deformation ± 30%
• Temperature Resistance (cured) -40°C to 100°C
• Elastic Modulus 100% 0.39 N/mm2 (DIN53504)
• Tensile/Shear Strength 0.85 MPa (DIN53504)
• Elongation At Break 300% (DIN53504)
• Application Temperature: From +5°C to 32°C

BENEFITS OF FIXTECH FIX 1DC 

• MS Polymer, chemically neutral and fully elastic
• Free of isocyanates and solvents
• Suitable for above and below the waterline
• Paintable and resistant to mould (compatibility tests recommended)
• UV stable producing non-yellowing whites and colour fast blacks
• Primerless bonding to most common substrates

• 2.2MPa - Equivalent to holding 22kg per cm2